Anotherpower.com Forum
Project Journals => User Journals => Steve => Topic started by: MadScientist267 on September 29, 2015, 09:09:18 am
-
I figure it's about time I mention what's controlling all of this... I needed a place to put the header pinouts anyway where I could get to them with anything... This takes care of both ;)
[attachimg=1]
More as it comes...
Steve
-
Needed to update/back this up...
[attachimg=1]
All of the GPIO are actually now spoken for, they just haven't been marked reserved yet.
Steve
-
I've held off on posting these until the system matured for the most part.. There's a few more things to add, but this is how the pinout above physically manifests...
[attachimg=1]
[attachimg=2]
One of the more notable things to mention about all this is if you notice, there's no fan anywhere. Considering I lost count some time back of the number of fans scattered throughout everywhere else (it's somewhere around 30), I thought it kinda strange that the computer running the show doesn't need active cooling of any sort, runs @ ~ 100% load averages, and the CPU, et al, run only lukewarm to the touch, and no heatsinks.
[attachimg=3]
[attachimg=4]
A little counterintuitive looking at the history of computers, ain't it? Haha But all is well!
Steve
-
[attachimg=1]
Another update to the header pinout... Getting there :)
The last 2 pins are up for grabs/debate... Only one is part of a header connector, the other (GPIO 8, pin 24) is sitting in a single pin gap between connectors... probably won't bother (wouldn't be a bad idea to keep a spare handy anyway). It's not that I'm itching to fill them, but a couple of things are competing for the win... Hard call right at this moment.
Steve