Here's a quick and simple battery holder even at My speed it only took me less than 5 minutes and on the PedGen about 5 minutes to full charge them!
You take 2 old plastic venetian blind slats cut them to length...just slightly longer than the 5 batteries placed end to end. the curved sides outward like this
() and tape the edges to form an oval tube a nail warmed just enough to poke
the holes in the wire bales which have a slight bend in the middle a cam effect to press against the end of the batteries .
I connect the charger by slipping one of the quick connect holes over the stub of wire sticking out from the tube .
end of the quick connect looks like this 0_0 squeezing the connection so it's just snug enough to slip on and stay .
hope this helps someone ....
sure beats those little wall wart chargers
Norm !