« previous next »
Pages: [1]   Go Down

Author Topic: SOLD ~ 8 foot S809 blades ~ SOLD  (Read 8623 times)

0 Members and 1 Guest are viewing this topic.

Offline ChrisOlson

  • Hero Member
  • *****
  • Posts: 510
  • Karma: +29/-5
  • just trying to survive
SOLD ~ 8 foot S809 blades ~ SOLD
« on: March 04, 2012, 03:42:25 pm »
I have a set of 8 foot S809 fiberglass blades that have been laying around my shop for three years.  These are NOT the cheap WindMax blades that fall apart.  They are the high buck, high quality PowerMax+/Talon turbine blades.  They measure slightly over 46" long and are about 8 foot diameter on a hub.  I put aluminum tape on the leading edges when they were new so there's zero leading edge wear.  They need to be cleaned up and polished out but otherwise they're ready to bolt on your turbine.

When I ran these blades they regularly put out 1 kW on a 12 volt machine in good wind.  They like to run fast - TSR 7 or better, or 700 rpm @ 28 mph.

I want $75 for the set.  They were over $200 new.

688-0
--
Chris
Logged

Offline tomw

  • Not as bad as you might think
  • Senior Moderator
  • Hero Member
  • *******
  • Posts: 739
  • Karma: +35/-0
  • hoplophobic people will fear my lifestyle
    • Zubbly's photos!
Re: 8 foot S809 blades
« Reply #1 on: March 04, 2012, 05:25:39 pm »
Chris;

I am interested in these if you could hold them until I get a chance to drive into the Wisconsin hinterlands to pick them up.  I would pay up front and pick up in a month or so.

Tom

Logged
Do NOT mistake me for any kind of "expert".

( ?° ?? ?°)


24 Trina 310 watt modules, SMA SunnyBoy 7.7 KW Grid Tie inverter.

I thought that they were angels, but much to my surprise, We climbed aboard their starship and headed for the skies

Offline ChrisOlson

  • Hero Member
  • *****
  • Posts: 510
  • Karma: +29/-5
  • just trying to survive
Re: 8 foot S809 blades
« Reply #2 on: March 04, 2012, 05:28:55 pm »
Ok - they have a SOLD sign on them    :)

I'll send you a PM to work out the details......
--
Chris
Logged

Offline bvan1941

  • Full Member
  • ***
  • Posts: 113
  • Karma: +5/-0
  • No Personal Text Set by User
Re: SOLD ~ 8 foot S809 blades ~ SOLD
« Reply #3 on: March 04, 2012, 09:41:22 pm »
Chris ,
If you have any more 6-8' S-809 blades let me know please.
I have a project building with that size rotor rqmts.
Thanks,
 Bill
Logged

Offline ChrisOlson

  • Hero Member
  • *****
  • Posts: 510
  • Karma: +29/-5
  • just trying to survive
Re: SOLD ~ 8 foot S809 blades ~ SOLD
« Reply #4 on: March 04, 2012, 09:52:38 pm »
That was the only set I had.  I got a set of 9.2 foot WindMax blades but I wouldn't sell those to my worst enemy.  I will GIVE to them to you for shipping cost.  But I would like to be clear that they are hollow and VERY poor quality blades compared to the PowerMax+/Talon blades.
--
Chris
Logged

Offline bvan1941

  • Full Member
  • ***
  • Posts: 113
  • Karma: +5/-0
  • No Personal Text Set by User
Re: SOLD ~ 8 foot S809 blades ~ SOLD
« Reply #5 on: March 04, 2012, 10:10:51 pm »
Chris,
I'll take your advice and stay with the Powermax blades. Appreciate your offer though. Keep me in mind if you hear of any becoming available.
Bill
Logged

Offline Volvo farmer

  • Forum Advisors
  • Jr. Member
  • ****
  • Posts: 40
  • Karma: +5/-0
  • milliwatt
Re: SOLD ~ 8 foot S809 blades ~ SOLD
« Reply #6 on: March 05, 2012, 07:02:39 am »
Does anyone have a link to where these Powermax/talon blades can be purchased new?
Logged

Offline bvan1941

  • Full Member
  • ***
  • Posts: 113
  • Karma: +5/-0
  • No Personal Text Set by User
Re: SOLD ~ 8 foot S809 blades ~ SOLD
« Reply #7 on: March 05, 2012, 04:57:51 pm »
Volvo farmer,

Try here at CMS MAGNETS.com

It's where I bought mine.
Bill
Logged
Pages: [1]   Go Up
« previous next »