Anotherpower.com Forum
The Corner Tavern. => Classifieds => Topic started by: Tritium on April 13, 2012, 08:20:58 pm
-
I have a set of new 12" rotors and a wood magnet template for sale with 24 2X1X1/2" N42 Epoxy coated magnets mounted on them (just super glued not yet potted).
I was planning to build a 10' turbine but plans have changed. Current value before shipping for these items is $309.60.
Weight is about 22 lbs plus packing materials so figure 30lbs although it may be a few pounds less.
First $250 or a reasonable offer takes them. Buyer pays actual shipping cost.
Origin Zip is 79370
Thurmond
-
any mounting holes in the rotors?
-
http://store.otherpower.com/parts/set-of-2-steel-magnet-rotor-disks-for-10ft-wind-turbine.html . These are 12" outer diameter. They have a 2.75" diameter hole in the middle. Both have 4 holes, .5010" in diameter located on a 4" diameter circle (this is a common bolt pattern for car, and trailer hubs), and one has an extra 4 holes which are tapped 1/2" - 13 for jacking screws.
Thurmond
-
any chance on just the mags?
dont mind if their scrathed up a bit ....
-
I used some industrial superglue (not the big box store watered down stuff) so I don't think they would come off easily.
Thurmond
-
Since there have been NO offers the price is dropped to $235 plus shipping. I can't go lower without taking a loss.
Thurmond
-
Hi Thurmond,..
I sent a pm to you on the other site,but got an error message,...not sure it went through?
Am interested though.
artv
-
Hi Thurmond,..
I sent a pm to you on the other site,but got an error message,...not sure it went through?
Am interested though.
artv
art thurmond_moore at yahoo.com the pm at the other site did go through and i responded there as well.
You can get the magnets alone here for 219 dollars for 24 (plus shipping)
http://www.magnet4less.com/product_info.php?products_id=62&osCsid=14af8c25ce51d95b3c0812b5cb016897
Thurmond
-
No longer for sale. I'll keep them. This thread can be locked.
Thanks
Thurmond