Removed springs and such inside battery compartment
in place of the AAA's is now the connect type like on a 9 volt
wires connected to the 4 LEDs ....slot on side of battery
compartment the connectors are inside wires come thru a slot
in the side and soldered to the battery terminals, about a 10
min. job for me to glue the batterys together and solder connecting
tabs on batteries.
No resistor on this one the other one with 101 ohm resistor too dim
with
very little drain on battery .
With out the resistor....too high of a drain.... need a happy medium
50 ohm ?
The 4 position slide switch,
1...off
2 other LED on
3 blinking red and blue LED on
4 the 4 LEDs on
could be
1 ...OFF
2 ...4 LEDS on with 100 ohm
3....4 LEDs on with 50 ohm
4....4 LEDs on no resistors.
Thinking about turning it over and putting enough solar cells to restore 100%
as I calculate it only uses about 10 or 15 % it should work out
rather well even on non-rechargable ? batteries.
Guys...or Gals....any comments ?
Norm.