Renewable Energy Questions/Discussion > Automation, Controls, Inverters, MPPT, etc
Inverter V2.0
noneyabussiness:
If anything to do with dynamic range etc. it would be completely opposite, the voltage would droop not increase, ignore last... sounds like it got a feedback " issue " and maxed out pwm momentarily, which would cause the voltage to spike ... check the egs001 card " firmness " in its socket, it may have " lost " or had disrupted its feedback loop causing the above... also check for dry joints, feedback transformer connections etc. I originally had sockets but felt too loose so i soldered the connections on..
noneyabussiness:
All a guess by the way... just where i would start looking
Navigation
[0] Message Index
[*] Previous page
Go to full version