Project Journals > Bryan

Mini Dual Axial Project

<< < (6/6)

Bryan1:
G'day Guy's,
                  Well spent a bit of time making up the voltage doubler and did the test with it. Open circuit the doubler soon got to 36 volts @ 300 rpm but connected no current at all @300rpm. Tried again at 350 rpm and got a pultry 0.6 amps so upped the speed to 440 rpm and was seeing 1.2 amps on the fluke and 0.58 amps on the doubler. Anyway look like this stator will be a beer coaster and time to start winding another test coil. This time I'll try 70 turns and use the wire I got out of a seeley motor. With a bit of luck I'll be able to get 2 in hand too.

Cheers Bryan ( downing the sorrows into a doz or so Boags premuim ales)

Navigation

[0] Message Index

[*] Previous page