I had the batteries checked and was told that they are in "bad shape". I will be buying new batteries soon and check again.Spent 2 days ,changing MOSFETS,control cards and all sorts of other optimistic activities
.
Fix and go again, but use decent batteries and decent battery leads... or don't use loads over say 100 watts, until you do have big cables and a low impedance battery.
1)Is there a way to check the impedance of batteries in house? I think the guy who checked my batteries used some kind of similar equipment.
2)I think the maximum current draw permissible from a battery is related to the Ah(C) rating of the same.I am using "no maintenance",sealed lead acid batteries.What would be maximum permissible current drawn allowed ?Assuming my batteries have given up,it happened suddenly,without any gradual deterioration.Is this a normal failure mode?
3)The cable manufacturers,give the maximum current that the cable can support.Is it ok to use this figure or should it be de-rated by some percentage ?
I know much of these queries are google-able,but i thought i wiould still post here,to get advice from people who would have gone through the same issues.
Thanks a lot Oztules,for your great support!