Hi Oztules sorry to be a pain but I do value your input.
The Sunny boy wakes up, the display cycles though the two strings of panels, showing the two voltages generated, but 0 amps in both cases. The display shows a picture of a switch feeding to the grid this is open, at the bottom It says (PE connect missing). I'm trying to measure the earth loop impedance in my work shop outside the main building, but both my meter for this are quite old and the earth trip switches off.
I have also been trying four times or more to get some info out of the chinky in Ireland where I purchased the PJ. They are driving me mad and not understanding a word I was saying.
My last Email to them went something like this.
hello sir. (from them)
sorry, we confuse the meaning.
(2) Next to C30 the screw is missing??, this is at the back of the lower
negative terminal, please look at one of your inverters.----we checked the
detail, can't find out the location of C30, could you help to take a photo
to show us, thanks.
(3) Tell me is there two fibre washer fitted to the screw in your inverter,
yes or no please??.-----could you help to take a photo to show us, thanks.
(4) Can you modify inverter to show DC amps on LCD display.------sorry, it
can't
(5) Can you please send me a circuit diagram of the 8000w LF
inverter.------sorry, we can't provide.
- rayjunglepower
So I wrote to them again.
Hi Mr rayjunglepower
I have tried to explain things to you three or four
times but you do not seem to have a very good grasp of English, I am trying
to work out if you are Chinese Japanese or F******* Peakanese.
Steve.
If you need any more info let me know Oz, I might hear back from Ireland (whoops ) tying the PJ N to earth in some way I would Think is the answer, stay with me Oz please. Steve.
I can remember many years ago having a similar problem, with a petrol generator, how did I fix it, I don't know. Steve.