Clockman, check your list against this BOM
"Bill of Material for Z:\HOME\OZTULES\DESKTOP\80109F.PCB"
"On 19-Jun-2016 at 18:40:09"
"Comment","Pattern","Quantity","Components"
"","10PIN","1","A79"
"","CON2","2","A57 A58"
"","SPADE","4","A51 A60 A61 A62"
"0r","AXIAL0.3","8","A4 A13 A14 A17 A26 A34 A44 A50"
"0r","AXIAL0.4","4","A27 A29 A41 A52"
"0r","AXIAL0.5","1","A28"
"100r","AXIAL0.3","2","A77 A78"
"100uf 63v","RB.2/.4","1","A71"
"104","C1","2","A22 A23"
"104","C1C","2","A48 A66"
"104","CAP2","5","A10 A12 A30 A68 A82"
"10k","AXIAL0.3","1","A38"
"10k","AXIAL0.4","2","A6 A40"
"10uf","C2S","4","A18 A19 A20 A21"
"10uf","CAP2","5","A8 A15 A45 A76 A83"
"120r","AXIAL1.1","1","A7"
"13v","DIODE0.4","1","A39"
"14v/240","TRANS","1","A9"
"1k","AXIAL0.3","5","A1 A33 A49 A63 A65"
"1k5","AXIAL0.3","1","A42"
"1k8","AXIAL0.3","1","A81"
"1n","CAP2","1","A5"
"2110","DIP14","2","A2 A3"
"22p","C2","2","A74 A75"
"2k","POT","1","A46"
"2uf","11PINCAP","1","A69"
"4007","DIODE0.3","8","A53 A54 A55 A56 A59 A64 A84 A85"
"4u7","CAP2","2","A31 A37"
"500r","POT","1","A47"
"5v6","D3","1","A16"
"7k5","AXIAL0.3","1","A67"
"8010","801032","1","A72"
"ct","CON2","1","A11"
"fr107","D3","2","A25 A80"
"led","LED","1","A32"
"tip35c","TO220V","2","A35 A36"
"xtal","RAD0.2","1","A24"
There seems to be too many 1k8 and 1k in your list.
Electro 10uf are now 4 on the outputs of the 2110 only
2x4u7 ceramic now
9x10uf, 4 of them electro 5 of them ceramic etc.
Some of the 104 on mine are 2 pin spaced, and some one pin space.. c1c and c1 are the same thing ( in the BOM).. so 4 of the single space and 5 of the 2 pin space.
Sorry for this, but this is the final one as per pics above .... may be slightly different to yours, but I understood only 1 led should have been different and the resistor for it ( yours had a pwr led on board as well as the off board pins I think.)
This was the trouble with a work in progress.. but all good in the end.
I just wish everyone could read protel files, and the version I have does old gerbers that no-one else can read with modern programs... will try to find my old design 99se, and see if it can do gerber 247 or what ever it is now.
.............oztules