Author Topic: My Scratch Pad  (Read 98473 times)

0 Members and 5 Guests are viewing this topic.

Offline MadScientist267

  • Impossible Condition Curator
  • Moderator
  • Hero Member
  • *****
  • Posts: 1514
  • Karma: +44/-4
  • Rules? What rules?
Re: My Scratch Pad
« Reply #45 on: November 03, 2014, 07:29:28 pm »
3440-0

3442-1
Wanted: Schrödinger's cat, dead and alive.

Offline Wolvenar

  • Senior Moderator
  • Hero Member
  • *******
  • Posts: 1474
  • Karma: +40/-0
  • Mr. Murphys pawn
Re: My Scratch Pad
« Reply #46 on: November 04, 2014, 07:03:24 am »
An idea for the facing side of the foam.

You could go to a mobile home dealer or lumber yard type place, to see about different interior wallboards.
First off it looks better, secondly it gives you room for a bit more solid mounting ideas as that would give a sturdier face that would not wear as quickly.
As is, the noise that will be in that box when moving down the road ( assuming you ever have passengers in the back while you are moving ) would be near deafening with squeaks etc. Also, this foam will be leaving shavings every time you move that thing.

You could glue the wallboard to the foam. oversize holes slightly and leave expansion and movement areas on each meeting to truck box place so the foam wont make a mess. It would be far more quiet and lessen vac time at destination.

I realize the budget concerns but its an idea for you to mull over.
Trying to make power from alternative energy any which way I can.
Just to abuse what I make. (and run this site)

Offline MadScientist267

  • Impossible Condition Curator
  • Moderator
  • Hero Member
  • *****
  • Posts: 1514
  • Karma: +44/-4
  • Rules? What rules?
Re: My Scratch Pad
« Reply #47 on: November 04, 2014, 03:32:47 pm »
A quick peek at the present response from the batteries under load (there's no charge input here), and a peek at what the WBJR screen looks like...

3444-0

3446-1

3448-2

3450-3

(EDIT - no idea why the last pic got flipped... if someone with the power beats me to it, can you right it for me?  :o

Wanted: Schrödinger's cat, dead and alive.

Offline MadScientist267

  • Impossible Condition Curator
  • Moderator
  • Hero Member
  • *****
  • Posts: 1514
  • Karma: +44/-4
  • Rules? What rules?
Re: My Scratch Pad
« Reply #48 on: November 04, 2014, 03:39:35 pm »
Wolv - I'm going to face everything with thin panel, 3/16, 3/8, and probably 1/2, ceiling, walls, floor, respectively
Wanted: Schrödinger's cat, dead and alive.

Offline MadScientist267

  • Impossible Condition Curator
  • Moderator
  • Hero Member
  • *****
  • Posts: 1514
  • Karma: +44/-4
  • Rules? What rules?
Re: My Scratch Pad
« Reply #49 on: November 04, 2014, 07:57:37 pm »
3452-0
Wanted: Schrödinger's cat, dead and alive.

Offline MadScientist267

  • Impossible Condition Curator
  • Moderator
  • Hero Member
  • *****
  • Posts: 1514
  • Karma: +44/-4
  • Rules? What rules?
Re: My Scratch Pad
« Reply #50 on: November 06, 2014, 04:24:43 pm »
3464-0
Wanted: Schrödinger's cat, dead and alive.

Offline MadScientist267

  • Impossible Condition Curator
  • Moderator
  • Hero Member
  • *****
  • Posts: 1514
  • Karma: +44/-4
  • Rules? What rules?
Re: My Scratch Pad
« Reply #51 on: November 06, 2014, 05:50:37 pm »
3466-0
Wanted: Schrödinger's cat, dead and alive.

Offline MadScientist267

  • Impossible Condition Curator
  • Moderator
  • Hero Member
  • *****
  • Posts: 1514
  • Karma: +44/-4
  • Rules? What rules?
Re: My Scratch Pad
« Reply #52 on: November 06, 2014, 06:19:23 pm »
3468-0
Wanted: Schrödinger's cat, dead and alive.

Offline MadScientist267

  • Impossible Condition Curator
  • Moderator
  • Hero Member
  • *****
  • Posts: 1514
  • Karma: +44/-4
  • Rules? What rules?
Re: My Scratch Pad
« Reply #53 on: November 07, 2014, 10:58:02 am »
3470-0

No lampblack on the fins, but it appears that it may be beneficial to not use it, as I noticed that the catalyst burns cleaner when it runs hotter...

Heatsinks aren't gooped to each other here... but the whole thing works very well, but does still lose a lot of heat out of the exhaust side. I'll keep playing with it...

Wanted: Schrödinger's cat, dead and alive.

Offline MadScientist267

  • Impossible Condition Curator
  • Moderator
  • Hero Member
  • *****
  • Posts: 1514
  • Karma: +44/-4
  • Rules? What rules?
Re: My Scratch Pad
« Reply #54 on: November 09, 2014, 10:36:29 pm »
3485-0
Wanted: Schrödinger's cat, dead and alive.

Offline MadScientist267

  • Impossible Condition Curator
  • Moderator
  • Hero Member
  • *****
  • Posts: 1514
  • Karma: +44/-4
  • Rules? What rules?
Re: My Scratch Pad
« Reply #55 on: November 11, 2014, 11:18:53 am »
3500-0
Wanted: Schrödinger's cat, dead and alive.

Offline MadScientist267

  • Impossible Condition Curator
  • Moderator
  • Hero Member
  • *****
  • Posts: 1514
  • Karma: +44/-4
  • Rules? What rules?
Re: My Scratch Pad
« Reply #56 on: November 11, 2014, 10:24:55 pm »
Transparent aluminum arrived today... so I redesigned the battery box...

3501-0

Nice, eh?  ;D 8)

Wanted: Schrödinger's cat, dead and alive.

Offline tomw

  • Not as bad as you might think
  • Senior Moderator
  • Hero Member
  • *******
  • Posts: 739
  • Karma: +35/-0
  • hoplophobic people will fear my lifestyle
    • Zubbly's photos!
Re: My Scratch Pad
« Reply #57 on: November 12, 2014, 09:28:33 am »
Transparent aluminum arrived today... so I redesigned the battery box...

(Attachment Link)

Nice, eh?  ;D 8)

You should have got the gen 2 "stealth" AL.

I built the gun cabinet in the far corner with it.

It is a bit fiddly to find the handle but being invisible it is pretty secure.

 :D
3503-0

Do NOT mistake me for any kind of "expert".

( ?° ?? ?°)


24 Trina 310 watt modules, SMA SunnyBoy 7.7 KW Grid Tie inverter.

I thought that they were angels, but much to my surprise, We climbed aboard their starship and headed for the skies

Offline MadScientist267

  • Impossible Condition Curator
  • Moderator
  • Hero Member
  • *****
  • Posts: 1514
  • Karma: +44/-4
  • Rules? What rules?
Re: My Scratch Pad
« Reply #58 on: November 12, 2014, 02:23:17 pm »
That's awesome! I didn't know they had a newer version... looks good!

There's an issue with mine, not sure if it's defective or what... it seems to be holding the batteries in place fine, but I can't set anything on top... whatever I put on it tends to end up laying on the batteries... hope I don't drop a wrench on it or something before I get it sorted out!  :o

Wanted: Schrödinger's cat, dead and alive.

Offline rossw

  • Senior Moderator
  • Hero Member
  • *******
  • Posts: 879
  • Karma: +35/-0
  • Grumpy-old-Unix-Admin
Re: My Scratch Pad
« Reply #59 on: November 12, 2014, 07:34:41 pm »

There's an issue with mine, not sure if it's defective or what... it seems to be holding the batteries in place fine, but I can't set anything on top...

I hear there were a few bad batches. Not enough filler or something. Take it back and exchange it.