Hi all! I spent a bit of internet time looking for a simple build toroid winder.
Lots of stuff on you tube and other places but all required more than I wanted
to invest in time and materials. I tried a plastic broom handle with a half spool
on each end which worked but just wanted something better.
Here it is... one coil of PEX and some superglue.
I used a util knife to cut the slot and make the joining tab but there
are other cutting tools, just be safe with whatever you use. 3/4" pex will hold
100 feet of 14awg easily, maybe 1/2" would have been better.
I know many of you who have done this probably enjoyed it, I found it as frustrating.
as picking cockel burs from sheep wool
Have fun
LH