[640x480] [2048x1536]
Two tanks, one slightly smaller than the other in diameter, larger one has the top cut just large enough to fit the smaller one in, and the bottom totaly out to remove the curved bottom for more room
Viewed: 339 times.
|
[640x480] [2048x1536]
The idea in doing this is to force the hot air into top and around the outside of the *water* tank down to the input at botom of the water tank exhaust and through the center pipe and out
Viewed: 328 times.
|
|
|
|
[640x480]
The Bottom of the larger tank removed to allow good fit, the inside tank must have room from the botton for airflow.
Viewed: 330 times.
|
[640x480]
Smaller of the two tanks through the larger ones top and welded into place, airtight
Viewed: 312 times.
|
[640x480]
New bottom welded on (recaimed metal from local landfill in pic)
Not cut out yet
Viewed: 321 times.
|
