Author Topic: New 12" rotors for sale Offer to sell Withdrawn* (Read 8473 times)

Tritium · « **on:** April 13, 2012, 08:20:58 pm »

I have a set of new 12" rotors and a wood magnet template for sale with 24 2X1X1/2" N42 Epoxy coated magnets mounted on them (just super glued not yet potted).
I was planning to build a 10' turbine but plans have changed. Current value before shipping for these items is $309.60.
Weight is about 22 lbs plus packing materials so figure 30lbs although it may be a few pounds less.

First $250 or a reasonable offer takes them. Buyer pays actual shipping cost.

Origin Zip is 79370

Thurmond

hiker1 · « **Reply #1 on:** April 15, 2012, 09:05:42 pm »

any mounting holes in the rotors?

Tritium · « **Reply #2 on:** April 15, 2012, 11:20:09 pm »

http://store.otherpower.com/parts/set-of-2-steel-magnet-rotor-disks-for-10ft-wind-turbine.html . These are 12" outer diameter. They have a 2.75" diameter hole in the middle. Both have 4 holes, .5010" in diameter located on a 4" diameter circle (this is a common bolt pattern for car, and trailer hubs), and one has an extra 4 holes which are tapped 1/2" - 13 for jacking screws.

Thurmond

hiker1 · « **Reply #3 on:** April 27, 2012, 12:49:13 am »

any chance on just the mags?
dont mind if their scrathed up a bit ....

Tritium · « **Reply #4 on:** April 27, 2012, 10:58:54 am »

I used some industrial superglue (not the big box store watered down stuff) so I don't think they would come off easily.

Thurmond

Tritium · « **Reply #5 on:** May 12, 2012, 06:33:21 pm »

Since there have been NO offers the price is dropped to $235 plus shipping. I can't go lower without taking a loss.

Thurmond

artv · « **Reply #6 on:** May 13, 2012, 04:39:42 pm »

Hi Thurmond,..

I sent a pm to you on the other site,but got an error message,...not sure it went through?

Am interested though.

artv

Tritium · « **Reply #7 on:** May 13, 2012, 05:45:32 pm »

Quote from: artv on May 13, 2012, 04:39:42 pm

Hi Thurmond,..

I sent a pm to you on the other site,but got an error message,...not sure it went through?

Am interested though.

artv

art thurmond_moore at yahoo.com the pm at the other site did go through and i responded there as well.

You can get the magnets alone here for 219 dollars for 24 (plus shipping)

http://www.magnet4less.com/product_info.php?products_id=62&osCsid=14af8c25ce51d95b3c0812b5cb016897

Thurmond

Tritium · « **Reply #8 on:** May 13, 2012, 10:40:58 pm »

No longer for sale. I'll keep them. This thread can be locked.

Thanks
Thurmond

News: